Elevators, Tilters & Hoppers
BL80 > BL241 Bowl Elevators
| Accessories | |
| Bowl lift designed for bowls from other manufacturers | The lift can be modified to fit bowls from other manufacturers, however this has to be approved by Glimek technical department by order |
| Higher tipping height | For tipping height over 3000 and up to maximum 4000 mm |
| Straight forward tipping | Tipping in the same direction as the infeed of the bowl. Side of column has to be stated when ordering |
| Technical data | |
| Max total height | 4250 mm |
| Max tipping height | 3000 mm with Glimek SM-241 bowl |
| Lifting capacity | 600 kg |
| Lifting speed | 5,0 meters/min |
| Power supply | 1,1 kW |
Bowl elevators are a solid bowl lift for lifting and tipping a bowl into a bulk hopper, directly into a divider or other similar applications. The lifting capacity is up to 600 kg load (bowl including dough). Standard version adapted to Glimek Mixers 120, 160 and 240 kg dough.
BH - Bulk Hopper
| Accessories | |
| Customized Bulk Hopper | Special customized designed Bulk Hopper adapted to the equipment to feed |
| Dough Conveyor | Horizontally mounted under the bulk hopper with scraper on the belt. Width 500 mm and a standard length 2000 mm |
| Dough Conveyor - additional length |
Additional length above 2000 mm |
| Dough Conveyor - reversible drive of conveyor |
Change the direction of the conveyor. Photocell for dough level included |
| Hopper Lubrication | Automatic lubrication inside bulk hopper by a spread tube system on top of the hopper. Separate unit with control box, pump unit and a built in oil container |
| Non-stick coating of the hopper | Interior of the dough hopper non-stick to assure a smooth infeed of the dough |
| Safety Guard | Customized safety guard for infeed of custom equipment |
| Service Platform, attached to frame |
Service platform with staircase and banisters attached to frame of bulk hopper |
| Service Platform, customized | Service platform designed according to customer |
| Stainless steel frame | Stainless steel frame instead of painted (standard) |
| Technical data | |
| Material bulk hopper | Stainless steel |
| Material lower frame | Painted |
| Volume, standard | 575 litres |
| Dough capacity | Approx. 350 kgs |
| Air supply | Compressed air, min 6 bar, 0,75 m3/hour |
| Requires compressed air min. 6 bar | |
Glimek Bulk Hopper BH with automatic dosing/portioning device enables a smooth and accurate feeding of a divider or similar applications. The electrical and pneumatic portioning is normally built in into the electrical cabinet of the Bowl Lift BL.